Encore ENPS-2012 User Manual

Configuration from Embedded Web Server
Users can set up print server’s SNMP functions by using
their browsers.
1. Click Setup, it then appears the sub-menu.
2. Click SNMP, it then as shown in the following picture.
SNMP Community: The print server supports up to two
community names. The default
community name is public
(case-sensitive), with Read Only
access right in default.
Support HP WebJetAdmin: This option allows user
determine to disable/enable
the Support HP
WebJetAdmin.
5 - 22

Encore ENPS-2012 Specifications

Ports & interfaces

USB ports	2 x USB 2.0
Parallel port	1 Bi-direction parallel port (IEEE 1284)
Network port	RJ-45 for 10Base-T or 100Base-TX