Configuration from Embedded Web Server
print server is configured
with (stored in the print
server's
memory), an
authentication failure trap
message is generated.
In the print server's SNMP implementation, the following
MIB objects are available for updating.
MIB Object Names Description
system.sysContact Indicates the network
administrator's name.
system.sysName Indicates the print
server's name for
identification.
system.sysLocation Indicates the location of
the print server.
snmp.snmpEnableAuthenTraps
Enables or disables the
function of sending
SNMP Authentication
Failure trap message to
the network
administrator, if the
community name within a
SNMP request is not
correct.
5 - 21