TCP/IP LPR Port Printing Installation
After this step, the Remote Printer Configuration appears.
Answer the questions as follows:
a. Do you want to install or remove printing (i/r/q) ?
[q] : -----> i
b. Do you wish to change the printer description
file /etc/printcap (y/n) [n] ? ---------> y
c. Enter information for remote printers or local
printers accepting remote printing requests
Please enter the printer name (q to quit): --->printer-1
You can enter a printer name you like in this option.
d. Is xxxx a remote printer or a local printer (r/l)
---------> r
e. Please enter the name of the remote host that
xxxx is attached to: ---------> the Print server‘s IP
address you specified in Step 2, for example,
192.72.214.103
Note: You can add the host name associated with the IP
address in the /etc/hosts file. If you have done this,
please use the host name instead of the IP address.
f. Printer xxxx is connected to host 192.72.214.103
Is this correct ? (y/n) ---------> y
g. After it shows some messages, it will ask you a
question.
If you‘re not sure, answer ’n‘ ? (y/n) [n] --------> n
7 - 11
To Next Page
Loading...
