TCP/IP LPR Port Printing Installation
h. Would you like this to be the system default
printer ? (y/n) [n]------->answer this question if you
like to make it as a default printer.
i. Do you want to install or remove printing (i/r/q) ?
[q] : -------> q
j. Do you want to star remote daemon now (y/n)
--------> y
11. Done. Submit print jobs by using “lp” or “lpr”
command.
For example: lp -d printer-1 /etc/printcap
SUN Solaris 2.x
1. Login root
2. Type “arp -s <IP address> < Print server‘s node
ID>”
The Print Server‘s node ID can be found from the white
label on the backside of the Print Server. For example:
arp -s 192.72.214.103 00:40:01:05:01:8c
3. Type “ping < Print server‘s IP address>”
For example:
ping 192.72.214.103
(You should get the responses from the Print Server).
4. Type “tftp < Print server‘s IP address>”
For example: tftp 192.72.214.103
At the tftp prompt, type “get config.txt” to get the Print
Server‘s configuration file.
7 - 12
To Next Page
Loading...
