Endress+Hauser Analytik Jena PlasmaQuant MS - Fig. 34 Quickly Adding Elements and Isotopes from the Periodic Table; Fig. 35 Selecting Internal Standard Correction

Method development PlasmaQuant MS product family
68
Fig. 34 Quickly adding elements and isotopes from the periodic table
5. Add an Internal Standard correction for those analytes that require it. Interpolate
correction is recommended if more than one Internal Standard is selected.
 Select the I
NTERNAL STANDARD column for the appropriate analyte.
 Select the Internal Standard correction from the drop-down list.
Fig. 35 Selecting internal standard correction
6. Add or modify an isotope correction equation if applicable.
 Select the element to adjust from the E
LEMENTS list.