Cerabar S PMP71 with 4 to 20 mA HART Operation
Endress+Hauser 21
5Operation
Feature 20 "Output; operation" in the order code provides you with information on the operating
options available to you.
5.1 Onsite display (optional)
A 4-line liquid crystal display (LCD) is used for display and operation.
The onsite display shows measured values, dialog texts, fault messages and notice messages.
The display of the device can be turned in 90° stages. Depending on the orientation of the device,
this makes it easy to operate the device and read the measured values.
Functions:
• 8-digit measured value display including sign and decimal point, unit display and bar graph for
current display
• Simple and complete menu guidance as parameters are split into several levels and groups
• Menu guidance in 8 languages (de, en, fr, es it, nl, jp, ch)
• Each parameter is given a 3-digit ID number for easy navigation
• Option for configuring the display according to individual requirements, such as language,
alternating display, contrast setting, display of other measured values such as sensor temperature
• Comprehensive diagnostic functions (fault and warning message, maximum indicators, etc.)
• Rapid and safe commissioning with the Quick Setup menus
P01-xMx7xxxx-07-xx-xx-xx-001
Versions in the order code Operation
A 4 to 20 mA HART; external operation, LCD Via onsite display and 3 keys on the exterior of the device
B 4 to 20 mA HART; internal operation, LCD Via onsite display and 3 keys on the inside of the device
C 4 to 20 mA; internal operation Without onsite display, 3 keys on the inside of the device
E
+
–
Bargraph
Operating keys
Symbol
Bargraph
ValueFunction name
Measured value display
Unit
Header line
Information
line
Main line
Parameter
Identification
number
Editing modes
Selection
options
Value that
can be edited
Current measured value
To Next Page
Loading...
