Endress+Hauser Ecograph RSG35 - Page 59

Ecograph T, RSG35 Repairs
Endress+Hauser 59
Item No. Description Order No.
14 Motherboard XPR0007-B1
18 Power supply 24 V AC/DC XPR0007-B2
18 Power supply 100-230 V AC (+/-10%) XPR0007-B3
17 Rear panel analog inputs 71165643
13 Terminals:
Terminal plug-in 3-pole for mains connection "N L PE" RM5.08 –
orange color
71123475
Terminal plug-in 3-pole FKC2.5/3-ST-5.08 for relay 1 (changeover) 71037408
Terminal plug-in 4-pole FKC2.5/4-ST-5.08 for relay 2+3 71037410
Terminal plug-in 6-pole FKC2.5/6-ST-5.08 for relay 4+5+6 71037411
Terminal plug-in 9-pole FMC1.5/9-ST-3.5 for digital inputs 71037363
Terminal plug-in 6-pole FMC1.5/6-ST-3.5 for analog input 51009211
Product structure for CPU with software
Item No. Description Order code
19 CPU + software XPR0008-_ _ _ _
Operating language:
Universal XPR0008-A1
Software:
Standard
Mathematics
XPR0008-A1A
XPR0008-A1B
Communication
Ethernet RJ45 + USB
RS232/485 + Ethernet RJ45 + USB
Modbus TCP slave + Ethernet RJ45 + USB
Modbus RTU/TCP slave + RS232/485 + Ethernet RJ45 + USB
XPR0008-A1_ A
XPR0008-A1_ B
XPR0008-A1_ C
XPR0008-A1_ D
Option:
Standard
Neutral
XPR0008-A1_ _ A
XPR0008-
Product structure for option retrofit
Item No. Description Order code
Option retrofit (please enter the serial number) XPR0009-_ _
Software:
Standard
Mathematics
XPR0009-A
XPR0009-B
Option:
Standard
Neutral
XPR0009-_ A
XPR0009-_ B
Standard
Modbus TCP slave (Modbus RTU only with RS485)

An RS485 interface is required for Modbus RTU. If there is no
RS485 in the device, a new CPU board must be ordered.
XPR0009-_ _ A
XPR0009-_ _ C
The software option can be enabled directly on the device. After ordering you will
receive instructions and a code that you must enter.