Ecograph T, RSG35 Appendix
Endress+Hauser 165
Description All recorded data are transmitted to an external WebDAV server (e.g. NAS). The format
can be specified or selected via "Setup → Advanced setup → System → External memory
-> Save as".
Parameters Description Direct access code
Enable Switch the WebDAV Client functionality on/off. When active, the device
copies the saved measured values automatically to the configured server.
Only possible using the Ethernet interface!
Selection: No, Yes, Yes (SSL)
Factory setting: No
472000-000
IP address Enter the IP address of the WebDAV server here.
A DNS name can also be used.
Entry: IP address
Factory setting: 0.0.0.0
472001-000
Port This communication port is used to communicate with the WebDAV
Server.
If your network is protected by a firewall, this port may have to be
enabled. Please contact your network administrator if this is the
case.
Entry: Numbers (max. 5 digits)
Factory setting: 80
472002-000
User name Input of the user name that can access the WebDAV server.
Entry: Text (max. 20 characters)
472004-000
Password Password for accessing the WebDAV server.
Entry: Text (max. 20 characters)
472007-000
Directory Enter the directory in which the data should be saved.
Entry: Text (max. 120 characters)
472005-000
Save as "Protected format": All data are stored in a manipulation protected
encrypted format. They can be interpreted only by the PC analysis
software provided.
"Open format": data are stored in a CSV format, this can be opened by a
number of different programs (e.g. MS Excel) (Attention: no
manipulation security).
Selection: protected format, open format (*.csv)
Factory setting: protected format
472010-000
Test of WebDAV Client settings under "Diagnostics → Simulation → WebDAV
Client".
16.1.6 "Diagnostics" submenu
Device information and service functions for a swift device check.
Only some of the diagnostic functions are available under Expert → Diagnostics. For
other functions, see Main menu → Diagnostics.
Actual diagnostics
Navigation Expert → Diagnostics → Actual diagnostics
Direct access code: 050000-000
Description Displays the current diagnosis message.
To Next Page
Loading...