Endress+Hauser Ecograph RSG35 - Inputs Submenu

Ecograph T, RSG35 Appendix
Endress+Hauser 97
Options Standard, Maths
16.1.2 "Inputs" submenu
Settings for analog and digital inputs.
"Universal inputs" submenu
Navigation Expert → System → Inputs → Universal inputs
Description Settings for the connected measuring points.
Add input
Navigation Expert → System → Inputs → Universal inputs → Add input
Direct access code: 222000/000
Description Addition of an input that must be switched on and configured according to the input
signal.
Options No, universal input x
Factory setting No
Delete input
Navigation Expert → System → Inputs → Universal inputs → Delete input
Direct access code: 222001/000
Description Delete an input configuration.
Options No, universal input x
Factory setting No
"Universal input x" submenu
Navigation Expert → System → Inputs → Universal inputs→ Universal input x
Description View or change settings for the selected channel.
x = place holder for selected universal input.
Signal