Appendix Ecograph T, RSG35
78 Endress+Hauser
16 Appendix
16.1 Operating items in the "Expert" menu
The parameter groups for the Expert setup contain all the parameters of the operating
menus: System, Input and Output Setup, Communication, Application, Diagnostics as well
as other parameters that are reserved for experts only.
For most settings, the "Setup" or "Expert" menu must be quit before the settings are
adopted. However settings such as the date/time are accepted immediately.
Direct access
Navigation Expert → Direct access
Description Direct access to active operating items (rapid access). Entering the direct access code takes
you directly to the desired operating parameter. The direct access code is displayed in the
Setup menu on the top right of the display (e.g. 00000-000).
Text entry (e.g. 00000-000)
16.1.1 "System" submenu
Basic settings that are needed to operate the device (e.g. date, time, etc.).
Language
Navigation Expert → System → Language
Direct access code: 010000-000
Description Select unit operating language.
Options German, English, Spanish, French, Italian, Dutch, Polish, Portuguese, Russian, Swedish,
Czech, Japanese, Chinese (Simplified), Chinese (Traditional)
Factory setting English; or preset to customer's preferred language
Device tag
Navigation Expert → System → Device tag
Direct access code: 000031-000
Description Individual device tag.
User entry Text entry (max. 32 characters)
Factory setting Unit 1
To Next Page
Loading...