Ecograph T, RSG35 Technical data
Endress+Hauser 77
Modbus RTU/TCP slave
The device can be connected to a Modbus system via RS485 or Ethernet interface. Up to 12
analog inputs and 6 digital inputs can be transmitted via Modbus and stored in the device.
15.10 Certificates and approvals
CE mark The measuring system meets the legal requirements of the applicable EC guidelines. These
are listed in the corresponding EC Declaration of Conformity together with the standards
applied. Endress+Hauser confirms successful testing of the device by affixing to it the CE
mark.
UL approval UL recognized component (see www.ul.com/database, search for Keyword "E225237")
CSA The product meets the requirements as per "CLASS 2252 05 - Process Control Equipment"
Other standards and
guidelines
• IEC 60529:
Degree of protection provided by housing (IP code)
• IEC/EN 61010-1:
Safety requirements for electrical equipment for measurement, control and laboratory
use
• IEC/EN 61326 Series:
Electromagnetic compatibility (EMC requirements)
15.11 Ordering information
Ordering information Detailed ordering information is available from the following sources:
• In the Product Configurator on the Endress+Hauser website: www.endress.com -> Click
"Corporate" -> Select your country -> Click "Products" -> Select the product using the
filters and search field -> Open product page -> The "Configure" button to the right of the
product image opens the Product Configurator.
• From your Endress+Hauser Sales Center: www.addresses.endress.com
Product Configurator - the tool for individual product configuration
• Up-to-the-minute configuration data
• Depending on the device: Direct input of measuring point-specific information such
as measuring range or operating language
• Automatic verification of exclusion criteria
• Automatic creation of the order code and its breakdown in PDF or Excel output
format
• Ability to order directly in the Endress+Hauser Online Shop
Scope of delivery The scope of delivery of the device comprises:
• Device (with terminals, as per order)
• 2 fastening clips
• USB cable
• Optional: Industrial grade SD card (card is located in the SD slot behind the flap on the
front of the housing)
• "Field Data Manager (FDM)" analysis software on DVD (Essential, Demo or Professional
version, depending on order)
• "FieldCare Device Setup / DeviceCare" configuration software on DVD
• Delivery note
• Multilanguage Brief Operating Instructions, hard copy
To Next Page
Loading...
Need help?
General