Ecograph T, RSG35 Appendix
Endress+Hauser 81
Navigation Expert → System → PRESET
Direct access code: 000044-000
Description Caution: Resets all the parameters to the factory settings!
Only visible/editable if the service code has been entered.
Options No, Factory reset, Customer setting
Clear memory
Navigation Expert → System → Clear memory
Direct access code: 059000-000
Description Delete internal memory.
Options No, Yes
"Date/time setup" submenu
Navigation Expert → System → Date/time setup
Description Contains settings for date/time.
Date format
Navigation Expert → System → Date/time setup → Date format
Direct access code: 110000-000
Description Select in which format the date is to be set and displayed.
Options DD.MM.YYYY, MM/DD/YYYY, YYYY-MM-DD
Factory setting DD.MM.YYYY
Time format
Navigation Expert → System → Date/time setup → Time format
Direct access code: 110001-000
Description Select in which format the time is to be set and displayed.
Options 24 hour, 12 hour AM/PM
To Next Page
Loading...