Appendix Ecograph T, RSG35
86 Endress+Hauser
Navigation Expert → System → Date/time setup → NT/ST changeover → Day
Direct access code: 110012-000
Description Day, when in the autumn a change from summer to normal time occurs.
Visible for NT/ST changeover = Automatic or Manual. Only editable if NT/ST changeover =
Manual.
Options Sunday, Monday, Tuesday, Wednesday, Thursday, Friday, Saturday
Factory setting Sunday
Month
Navigation Expert → System → Date/time setup → NT/ST changeover → Month
Direct access code: 110013-000
Description Month, when in the autumn a change from summer to normal time occurs.
Visible for NT/ST changeover = Automatic or Manual. Only editable if NT/ST changeover =
Manual.
Options January, February, March, April, May, June, July, August, September, October, November,
December
Factory setting October
Date
Navigation Expert → System → Date/time setup → NT/ST changeover → Date
Direct access code: 110014-000
Description Date next autumn when summer time changes back to normal time.
Only visible if NT/ST changeover = Automatic or Manual. Cannot be edited.
Time
Navigation Expert → System →Date/time setup → NT/ST changeover → Time
Direct access code: 110015-000
Description Point of time when the time is moved back by 1 hour on the day of the changeover from
summer time to normal time (in the set time format).
Visible for NT/ST changeover = Automatic or Manual. Only editable if NT/ST changeover =
Manual.
User entry Time in set time format
Factory setting 02:00
To Next Page
Loading...