Ecograph T, RSG35 Appendix
Endress+Hauser 91
Memory build-up
Navigation Expert → System → External memory → Memory build-up
Direct access code: 140001-000
Description "Stack memory": no more data can be stored once the data carrier is full.
"Ring memory": once the data carrier is full the oldest data are deleted so that new data can
be stored (First in first out (FIFO).
The "Ring memory" setting refers only to the automatic storage of measured values.
Manual save functions ("Operation -> SD card -> Update/Save measured values") are
not affected.
Options Stack memory, Ring memory (FIFO)
"Ring memory" can be selected only if "Save as" is set to "protected format" (and not
"CSV").
Factory setting Stack memory
Warning at
Navigation Expert → System → External memory → Warning at
Direct access code: 140005-000
Description Issues a warning before the data carrier is x% full.
A warning is indicated on the device and this is also stored in the event buffer.
A relay can also be switched.
Only for external SD card (does not apply to USB stick)!
User entry 0 to 99%
Factory setting 90
Switches relay
Navigation Expert → System → External memory → Switches relay
Direct access code: 140006-000
Description When the warning "Data carrier full" is displayed a relay can also be switched on.
Options Not used, Relay x
All the available relays are displayed
Factory setting Not used
To Next Page
Loading...
Need help?
General