Endress+Hauser Levelflex FMP54 - Setup Menu

Levelflex FMP51, FMP52, FMP54 FOUNDATION Fieldbus Operating menu
Endress+Hauser 159
17.3 "Setup" menu
• : Marks the navigation path to the parameter via the display and operating
module.
• : Marks the navigation path to the parameter via an operating tool (e.g.
FieldCare).
• : Marks parameters which can be locked via the software locking →  69.
Navigation  Setup
Operating mode 
Navigation  Setup → Operating mode
Prerequisite The device has the "interface measurement" application package (available for FMP51,
FMP52, FMP54)
6)
. FMP55 always contains this package.
Description Select operating mode.
Selection • Level
• Interface with capacitance
*
• Interface
*
Factory setting • FMP51/FMP52/FMP54: Level
• FMP55: Interface with capacitance
Additional information The Interface with capacitance option is only available for FMP55.
Distance unit 
Navigation  Setup → Distance unit
Description Select distance unit.
Selection
SI units
• mm
• m
US units
• ft
• in
Factory setting m
6) Product structure: Feature 540 "Application Package", Option EB "Interface measurement"
* Visibility depends on order options or device settings