Endress+Hauser Levelflex FMP54 - Index Tables of Endress+Hauser Parameters; Setup Transducer Block

Levelflex FMP51, FMP52, FMP54 FOUNDATION Fieldbus Integration into a FOUNDATION Fieldbus network
Endress+Hauser 85
Channel Measured value
145 Interface distance
172 Calculated DC value
211 Terminal voltage
212 Sensor debug
32785 Absolute EOP amplitude
32786 Absolute echo amplitude
32787 Absolute interface amplitude
32856 Distance
32885 Elektronic temperature
32938 Interface linearized
32949 Level linearized
33044 Relative echo amplitude
33045 Relative interface amplitude
33070 Noise of signal
33107 Upper interface thickness
9.6 Index tables of Endress+Hauser parameters
The following tables list the manufacturer-specific device parameters for the Resource
Blocks. For the FOUNDATION Fieldbus parameters, see the document BA062S "Guidline -
FOUNDATION Fieldbus Function Blocks", which can be downloaded from
www.endress.com.
9.6.1 Setup Transducer Block
Name Label Index Data type Size
(Bytes)
Storage
Class
Write
access
MODE_BL
K
Description
bin_type Bin type 54 ENUM16 2 Static x OOS
confirm_distance Confirm distance 82 ENUM16 2 Static x OOS
filtered_dist_val Distance 76 FLOAT 4 Dynamic
interface_distance Interface distance 79 FLOAT 4 Dynamic
map_end_x Present mapping 84 FLOAT 4 Dynamic
mapping_end_point Mapping end point 83 FLOAT 4 Static x AUTO
record_map Record map 86 ENUM16 2 Static x OOS
operating_mode Operating mode 50 ENUM16 2 Static x OOS
signal_quality Signal quality 81 ENUM16 2 Dynamic
medium_group Medium group 55 ENUM16 2 Static x OOS
tank_level Tank level 66 ENUM16 2 Static x OOS
tank_type Tank type 52 ENUM16 2 Static x OOS
tube_diameter Tube diameter 53 FLOAT 4 Static x OOS
dc_value DC value 68 ENUM16 2 Static x OOS
distance_to_upper_connect
ion
Distance to upper
connection
67 FLOAT 4 Static x OOS
empty_calibration Empty calibration 56 FLOAT 4 Static x OOS
full_calibration Full calibration 57 FLOAT 4 Static x OOS