Endress+Hauser Levelflex FMP54 - Block Model; Blocks of the Device Software

Levelflex FMP51, FMP52, FMP54 FOUNDATION Fieldbus Integration into a FOUNDATION Fieldbus network
Endress+Hauser 83
–
–
RESOURCE_xxxxxxxxxxx (RB2)
EH_Levelflex_xxxxxxxxxx
SETUP_ (TRDSUP)xxxxxxxxxxx
DISPLAY_ (TRDDISP)xxxxxxxxxxx
DIAGNOSTIC_ (TRDDIAG)xxxxxxxxxxx
EXPERT_CONFIG_ (TRDEXP)xxxxxxxxxxx
EXPERT_INFO_ (TRDEXPIN)xxxxxxxxxxx
SERVICE_INFO_ (TRDSRVIF)xxxxxxxxxxx
DATA_TRANSFER_ (TRDHROM)xxxxxxxxxxx
ANALOG_INPUT_1_ (AI)xxxxxxxxxxx
ANALOG_INPUT_2_ (UNK)xxxxxxxxxxx
DISCRETE_INPUT_ (DI)xxxxxxxxxxx
ARITHMETIC_ (AR)xxxxxxxxxxx
INPUT_SELECTOR_ (IS)xxxxxxxxxxx
ANALOG_ALARM_ (AAL)xxxxxxxxxxx
PID_ (PID)xxxxxxxxxxx
SIGNAL_CHAR_ (SC)xxxxxxxxxxx
INTEGRATOR_ (IT)xxxxxxxxxxx
SERVICE_SENSOR_ (TRDSRVSB)xxxxxxxxxxx
ADV_SETUP_ (TRDASUP)xxxxxxxxxxx
1 2
A0017208
 19 Typical display in a configuration program after the connection has been established
1 Device name
2 Serial number
9.4 Block model
9.4.1 Blocks of the device software
The device has the following blocks:
• Resource Block (device block)
• Transducer Blocks
– Setup Transducer Block (TRDSUP)
– Advanced Setup Transducer Block (TRDASUP)
– Display Transducer Block (TRDDISP)
– Diagnostic Transducer Block (TRDDIAG)
– Expert Configuration Transducer Block (TRDEXP)
– Expert Information Transducer Block (TRDEXPIN)
– Service Sensor Transducer Block (TRDSRVSB)
– Service Information Transducer Block (TRDSRVIF)
– Data Transfer Transducer Block (TRDHROM)
• Function Blocks
– 2 Analog Input Blocks (AI)
– 1 Discrete Input Block (DI)
– 1 PID Block (PID)
– 1 Arithmetic Block (AR)
– 1 Signal Characterizer Block (SC)
– 1 Input Selector Block (IS)
– 1 Integrator Block (IT)
– 1 Analog Alarm Block (AAL)