Endress+Hauser Levelflex FMP54 - Page 162

Operating menu Levelflex FMP51, FMP52, FMP54 FOUNDATION Fieldbus
162 Endress+Hauser
0%
E
E
0%
A0013177
 36 Empty calibration (E) for interface measurements
In the case of interface measurements the Empty calibration parameter is valid for
both, the total and the interface level.
Full calibration 
Navigation  Setup → Full calibr.
Description Specify the distance F between the minimum level (0%) and the maximum level (100%).
User entry Depending on the probe
Factory setting Depending on the probe
Additional information
0%
F
100%
A0013186
 37 Full calibration (F) for level measurements in liquids