Endress+Hauser Levelflex FMP54 - Page 214

Operating menu Levelflex FMP51, FMP52, FMP54 FOUNDATION Fieldbus
214 Endress+Hauser
Additional information The setting does not affect the measuring or computational accuracy of the device.
Display interval
Navigation  Setup → Advanced setup → Display → Display interval
Description Set time measured values are shown on display if display alternates between values.
User entry 1 to 10 s
Factory setting 5 s
Additional information This parameter is only relevant if the number of selected measuring values exceeds the
number of values the selected display format can display simultaneously.
Display damping 
Navigation  Setup → Advanced setup → Display → Display damping
Description Define display reaction time to fluctuations in the measured value.
User entry 0.0 to 999.9 s
Factory setting 0.0 s
Header 
Navigation  Setup → Advanced setup → Display → Header
Description Select header contents on local display.
Selection • Device tag
• Free text
Factory setting Device tag