Endress+Hauser Levelflex FMP54 - Page 231

Levelflex FMP51, FMP52, FMP54 FOUNDATION Fieldbus Operating menu
Endress+Hauser 231
Level linearized
Navigation  Diagnostics → Measured val. → Level linearized
Description Displays linearized level.
Additional information • The unit is defined by the Unit after linearization parameter →  192.
• For interface measurements, this parameter always refers to the total level.
Interface distance
Navigation  Diagnostics → Measured val. → Interface dist.
Prerequisite Operating mode (→  159) = Interface or Interface with capacitance
Description Displays the measured distance D
I
between the reference point (lower edge of flange or
threaded connection) and the interface.
Additional information
D
I
D
I
A0013202
The unit is defined in the Distance unit parameter (→  159).
Interface linearized
Navigation  Diagnostics → Measured val. → Interf. lineariz
Prerequisite Operating mode (→  159) = Interface or Interface with capacitance
Description Displays the linearized interface height.
Additional information The unit is defined in the Unit after linearization parameter →  192.