Endress+Hauser Micropilot FMR60B - Operation; Reading off the device locking status; Reading off measured values; Adapting the device to process conditions

Micropilot FMR60B PROFINET with Ethernet-APL
50 Endress+Hauser
Integrated antenna, PEEK, 40 mm (1.5 in)
A
B
1
1
30 (1.18)
L2
L1
R
!42.5 (1.67)
!54.8 (2.18)
A0046482
 57 Dimensions; integrated antenna, PEEK, 40 mm (1.5 in); process connection, thread 1-1/2". Unit of
measurement mm (in)
A Process temperature version ≤150 °C (302 °F)
B Process temperature version ≤200 °C (392 °F)
R Reference point of measurement
1 Bottom edge of housing
L1 153 mm (6.02 in); version with Ex d or XP approval +5 mm (+0.20 in)
L2 165 mm (6.50 in); version with Ex d or XP approval +5 mm (+0.20 in)
Weight
The weights of the individual components must be added together for the total weight.
Housing
Weight including electronics and display.
Single compartment housing
• Plastic: 0.5 kg (1.10 lb)
• Aluminum: 1.2 kg (2.65 lb)
• 316L hygiene: 1.2 kg (2.65 lb)
Dual compartment housing
Aluminum: 1.4 kg (3.09 lb)
Dual compartment housing, L-form
• Aluminum: 1.7 kg (3.75 lb)
• Stainless steel: 4.5 kg (9.9 lb)
Antenna and process connection adapter
The flange weight (316/316L) depends on the selected standard and sealing surface.
Details -> TI00426F or in the relevant standard
The heaviest version is indicated for the antenna weights
Encapsulated antenna, PVDF, 40 mm (1.5 in)
0.60 kg (1.32 lb)
Drip-off antenna 50 mm (2 in)
1.70 kg (3.75 lb)
Integrated antenna, PEEK, 20 mm (0.75 in)
1.10 kg (2.43 lb) + flange weight
Integrated antenna, PEEK, 40 mm (1.5 in)
1.90 kg (4.19 lb) + flange weight