Micropilot FMR60B PROFINET with Ethernet-APL
54 Endress+Hauser
Display and user interface
Operating concept
Operator-oriented menu structure for user-specific tasks
• Guidance
• Diagnostics
• Application
• System
Fast and safe commissioning
• Interactive wizard with graphical user interface for guided commissioning in FieldCare, DeviceCare
or DTM, AMS and PDM-based third-party tools or SmartBlue
• Menu guidance with short explanations of the individual parameter functions
• Standardized operation at the device and in the operating tools
Integrated HistoROM data memory
• Adoption of data configuration when electronics modules are replaced
• Up to 100 event messages recorded in the device
Efficient diagnostic behavior increases measurement availability
• Remedial measures are integrated in plain text
• Diverse simulation options
Bluetooth (optionally integrated in local display)
• Quick and easy setup with SmartBlue app or PC with DeviceCare, version 1.07.05 and higher, or
FieldXpert SMT70
• No additional tools or adapters required
• Encrypted single point-to-point data transmission (tested by Fraunhofer Institute) and password-
protected communication via Bluetooth® wireless technology
Languages
Operating languages
• English option (English option is set at the factory if no other language is ordered)
• Deutsch
• Français
• Español
• Italiano
• Nederlands
• Portuguesa
• Polski
• русский язык (Russian)
• Türkçe
• 中文 (Chinese)
• 日本語 (Japanese)
• 한국어 (Korean)
• čeština (Czech)
• Svenska
Local operation Operating keys and DIP switches on the electronic insert
A0046061
62 Operating keys and DIP switches on the Ethernet-APL electronic insert
1 Operating key for Reset password and Reset device
2 DIP switch for setting the service IP address
3 DIP switch for locking and unlocking the device
The setting of the DIP switches on the electronic insert has priority over the settings made via
other operation methods (e.g. FieldCare/DeviceCare).
To Next Page
Loading...
