Endress+Hauser Micropilot FMR60B - System Integration; Supported Operating Tools; Certificates and Approvals

Micropilot FMR60B PROFINET with Ethernet-APL
56 Endress+Hauser
The IP address can be assigned to the device in a variety of ways:
• Dynamic Configuration Protocol (DCP), factory setting
The automation system (e.g., Siemens S7) automatically assigns the IP address to the device
• Software addressing
The IP address is entered via the IP address parameter
• DIP switch for service
The device then has the fixed IP address 192.168.1.212
The IP address is only adopted following a restart.
The IP address can now be used to establish the connection to the network
The default setting is that the device uses the Dynamic Configuration Protocol (DCP). The
automation system (e.g., Siemens S7) automatically assigns the IP of the device.
Via service interface (CDI)
1 2 3
A0039148
1 Computer with FieldCare/DeviceCare operating tool
2 Commubox FXA291
3 Service interface (CDI) of the measuring device (= Endress+Hauser Common Data Interface)
Via Web browser
Function scope
Thanks to the integrated Web server the device can be operated and configured via a Web browser.
The structure of the operating menu is the same as for the local display. In addition to the measured
values, device status information is also displayed and allows users to monitor the status of the
device. Furthermore the device data can be managed and the network parameters can be configured.
Operation via Bluetooth® wireless technology (optional)
Prerequisite
• Measuring device with Bluetooth display
• Smartphone or tablet with SmartBlue app or PC with DeviceCare, version 1.07.00 and higher, or
FieldXpert SMT70
The connection has a range of up to 25 m (82 ft). The range can vary depending on environmental
conditions such as attachments, walls or ceilings.
System integration PROFINET with Ethernet-APL
PROFINET Profile 4.02
Supported operating tools
Smartphone or tablet with Endress+Hauser SmartBlue (app), DeviceCare, version 1.07.00 and
higher, FieldCare, DTM, AMS and PDM.
PC with Web server via fieldbus protocol.
Certificates and approvals
Current certificates and approvals for the product are available at www.endress.com on the relevant
product page:
1. Select the product using the filters and search field.
2. Open the product page.
3. Select Downloads.