OXY5500 Gas Analyzer Operating Instructions
Endress+Hauser 9
Figure 3. Inside cabinet view (AC version)
Figure 4. OXY5500 probe sensor spot
Endress+Hauser’s fiber-optic oxygen sensors are made with 2 mm polymer optical fibers. The sensing portion is a 4
mm stainless steel probe. As a standard, the probe is mounted in a 1/4 in. Swagelok Union Tee using a 1/4 in. x 4
mm adapter as shown in Figure 5. Please contact your sales representative for more information.
Figure 5. Standard fiber-optic oxygen sensors fittings
Electro-Optical Module
Fuse Enclosure
Optical Module with
SMA Connector
Fuse Enclosure
Relays
RJ-45 and USB Connectors
AC/DC Power Connection
To Next Page
Loading...
