Endress+Hauser Proline Promag 50 - Page 148

10 Technical data PROline Promag 50
148 Endress+Hauser
Coupling:
Threaded adapter SMS 1145
1.4404 / 316L
5*H**-5***********
Sensor
DN [mm]
Fits to
Piping OD
SMS 1145
Diameter
[mm]
di
[mm]
G
[mm]
D
[mm]
L
[mm]
LK
[mm]
40 38.1 x 1.65 38.0 35.5 Rd 60 x 1/6" 92 63 71.0
50 50.8 x 1.65 51.0 48.5 Rd 70 x 1/6" 105 65 83.5
65 63.5 x 1.65 63.5 60.5 Rd 85 x 1/6" 121 70 100.0
80 76.2 x 1.65 76.0 72.0 Rd 98 x 1/6" 147 75 121.0
100 101.6 x 1.65 101.6 97.6 Rd 132 x 1/6" 168 70 141.5
– Fitting length = (2 x L) + 140 mm (DN 40…65) / + 200 mm (DN 80…100)
– If pigs are used for cleaning, it is essential to take the inside diameters of measuring tube (Page 135)
and process connection (di) into account.
D
LK
di
G
L
F06-xxHxxxxx-06-09-07-xx-000
Coupling:
Threaded adapter ISO 2853
1.4404 / 316L
5*H**-6***********
Sensor
DN [mm]
Fits to
Piping ISO 2037 /
BS 4825-1
ISO 2853
Diameter
[mm]
di
[mm]
G
[mm]
D
[mm]
L
[mm]
LK
[mm]
40 38.0 x 1.6 38.0 35.6 50.6 92 61.5 71.0
50 51.0 x 1.6 51.0 48.6 64.1 105 61.5 83.5
65 63.5 x 1.6 63.5 60.3 77.6 121 61.5 100.0
80 76.1 x 1.6 76.1 72.9 91.1 147 61.5 121.0
100 101.6 x 2.0 101.6 97.6 118.1 168 61.5 141.5
– Fitting length = (2 x L) + 140 mm (DN 40…65) / + 200 mm (DN 80…100)
– If pigs are used for cleaning, it is essential to take the inside diameters of measuring tube (Page 135)
and process connection (di) into account.
G
di
D
LK
L
F06-xxHxxxxx-06-09-07-xx-003