2 Identification PROline Promass 80
10 Endress+Hauser
2.1.2 Nameplate of the sensor
Fig. 2: Nameplate specifications for the “Promass F” sensor (example)
1 Ordering code/Serial number: See the specifications on the order confirmation for the meanings of the
individual letters and digits.
2 Calibration factor: 2.510; zero point: –11
3 Nominal diameter device: DN 25 / 1"
4 Nominal diameter flange: DN 25 / 1"
Pressure rating: EN (DIN) PN 100 bar
5 Material of measuring tubes: Stainless steel 1.4539/904L
6 TMmax +200 °C / +392 °F (max. fluid temperature)
7 Pressure range of secondary containment: max. 40 bar (600 psi)
8 Accuracy of density measurement: ± 0.001 g/cc
9 Additional information (examples):
– With 5-point calibration
– With 3.1 B certification for fluid wetted materials
10 Reserved for information on special products
11 Ambient temperature range
12 Degree of protection
13 Flow direction
14 Reserved for additional information on device version (approvals, certificates)
2.2 CE mark, declaration of conformity
The devices are designed in accordance with good engineering practice to meet state-
of-the-art safety requirements, have been tested, and left the factory in a condition in
which they are safe to operate. The devices comply with the applicable standards and
regulations in accordance with EN 61010 “Protection Measures for Electrical Equipment
for Measurement, Control, Regulation and Laboratory Procedures” and with the EMC
requirements of EN 61326/A1.
The measuring system described in these Operating Instructions thus complies with the
statutory requirements of the EC Directives. Endress+Hauser confirms successful
testing of the device by affixing to it the CE mark.
1
2
4
5
6
7
8
9
11
12
13
200°C / 392°F
40 bar / 600 psi Container
2.5100 / -11
DN25 / 1" EN (DIN) PN100
1.4539 / 904L
5P-CAL, 3.1B
Density cal.:
-20°C (-4°F)<Tamb<+60°C (+140°F)
PROMASS F
ENDRESS+HAUSER
Pat. US 5,796,011
Materials:
TMmax.:
Order Code:
K-factor:
TAG No.:
Ser.No.:
IP67/NEMA/Type4X
+/-0.001g/cc
XXF25-XXXXXXXXXXXX
12345678901
ABCDEFGHJKLMNPQRST
i
14
DN25 / 1"
Size :
3
10
F06-8xFxxxxx-18-05-xx-xx-000
To Next Page
Loading...
