10 Technical data PROline Promass 80
144 Endress+Hauser
10.13 Dimensions: Promass H
Dimensions Promass H: flange connections EN (DIN), ANSI, JIS
Fig. 78: Dimensions Promass H: flange connections EN (DIN), ANSI, JIS
Flange EN 1092-1 (DIN 2501) / PN 40: 1.4301/304, parts in contact with medium zirconium 702
Surface roughness (flange): EN 1092-1 Form B1 (DIN 2526 Form C), Ra 1.6...3.2
µm
DN A B C D G L N S LK U di
8
1)
384 280 104 41 95 336 4 x Ø14 20 65 17.30 8.51
15 385 280 105 41 95 440 4 x Ø14 20 65 17.30 12.00
25 401 280 121 41 115 580 4 x Ø14 19 85 28.50 17.60
40 475 304 171 65 150 794 4 x Ø18 21.5 110 43.10 25.50
50 556 315 241 76 165 1071 4 x Ø18 23.5 125 54.50 40.50
1)
DN 8 with DN 15 flanges as standard
Flange ANSI B16.5 / Cl 150: 1.4301/304, parts in contact with medium zirconium 702
Surface roughness (flange): Ra 3.2...6.3
µm
DN A B C D G L N S LK U di
8
1)
3/8" 384 280 104 41 88.9 336 4 x Ø15.7 12.8 60.5 15.70 8.51
15 1/2" 385 280 105 41 88.9 440 4 x Ø15.7 12.8 60.5 15.70 12.00
25 1" 401 280 121 41 108.0 580 4 x Ø15.7 15.1 79.2 26.70 17.60
40 1 1/2" 475 304 171 65 127.0 794 4 x Ø15.7 17.5 98.6 40.90 25.50
50 2" 556 315 241 76 152.4 1071 4 x Ø19.1 23.6 120.7 52.60 40.50
1)
DN 8 with DN 15 flanges as standard
F06-80Hxxxxx-06-00-xx-xx-000
To Next Page
Loading...
