PROline Promass 80 2 Identification
Endress+Hauser 9
2 Identification
2.1 Device designation
The “Promass 80” flow measuring system consists of the following components:
• Promass 80 transmitter
• Promass F, Promass M, Promass E, Promass A, Promass H or Promass I sensor
In the compact version, transmitter and sensor form a single mechanical unit; in the
remote version they are installed separately.
2.1.1 Nameplate of the transmitter
Fig. 1: Nameplate specifications for the “Promass 80” transmitter (example)
1 Ordering code/serial number: See the specifications on the order confirmation for the meanings of the
individual letters and digits.
2 Power supply / frequency: 20...55 V AC /16...62 V DC / 50...60 Hz
Power consumption: 15 VA / 15 W
3 Available inputs / outputs:
I-OUT (HART): with current output (HART)
f-OUT: with pulse/frequency output
STATUS-IN: with status input (auxiliary input)
STATUS-OUT: with status output (switching output)
4 Reserved for information on special products
5 Ambient temperature range
6 Degree of protection
PROMASS
ENDRESS+HAUSER
Order Code:
80
Ser.No.:
TAG No.:
20-55VAC/16-62VDC
50-60Hz
15VA/15W
IP67/NEMA/Type4X80F25-XXXXXXXXXXXX
12345678901
ABCDEFGHJKLMNPQRST
–20°C (–4°F) < Tamb < +60°C (+140°F)
i
1
6
5
2
3
4
Pat. US 5,479,007
Pat. US 4,768,384
Pat. UK 261 435
5,648,616
4,801,897
EP 262 573 EP 618 680
I-OUT (HART), f-OUT
STATUS-IN, STATUS-OUT
F06-80xxxxxx-18-06-xx-xx-000
To Next Page
Loading...
