PROline Promass 80 10 Technical data
Endress+Hauser 115
10.10 Dimensions: Promass M
Dimensions Promass M: flange connections EN (DIN), ANSI, JIS
Fig. 52: Dimensions Promass M: flange connections EN (DIN), ANSI, JIS
Flange EN 1092-1 (DIN 2501) / PN 16: PVDF
DN A B C G L N S LK U di
8 301 266 35 95 370 4 x Ø14 16 65 16.1 5.53
15 305 268 37 95 404 4 x Ø14 16 65 16.1 8.55
25 312 272 40 115 440 4 x Ø14 18 85 28.5 11.38
40 332 283 49 150 550 4 x Ø18 18 110 43.1 17.07
50 351 293 58 165 715 4 x Ø18 20 125 54.5 25.60
Flange EN 1092-1 (DIN 2501 / DIN 2512N
1)
) / PN 40: 1.4404/316L, titanium
Surface roughness (flange): EN 1092-1 Form B1 (DIN 2526 Form C), Ra 6.3...12.5
µm
DN A B C G L N S LK U di
8 301 266 35 95 370 4 x Ø14 16 65 17.3 5.53
15 305 268 37 95 404 4 x Ø14 16 65 17.3 8.55
25 312 272 40 115 440 4 x Ø14 18 85 28.5 11.38
40 332 283 49 150 550 4 x Ø18 18 110 43.1 17.07
50 351 293 58 165 715 4 x Ø18 20 125 54.5 25.60
80 385 309 76 200 840 8 x Ø18 24 160 82.5 38.46
1)
Flange with groove to EN 1092-1 Form D (DIN 2512N) available
Flange EN 1092-1 (DIN 2501) / PN 40 (with DN 25 flanges): 1.4404/316L
Surface roughness (flange): EN 1092-1 Form B1 (DIN 2526 Form C), Ra 6.3...12.5
µm
DN A B C G L N S LK U di
8 301 266 35 115 440 4 x Ø14 18 85 28.5 5.53
15 305 268 37 115 440 4 x Ø14 18 85 28.5 8.55
F06-80Mxxxxx-06-00-xx-xx-002
To Next Page
Loading...
