Endress+Hauser Proline Promass 80 - Brief operating instructions to the function matrix

5 Operation PROline Promass 80
32 Endress+Hauser
5.2 Brief operating instructions to the function matrix
!
Note:
• See the general notes on Page 33.
• Function descriptions → see the “Description of Device Functions” manual
1. HOME position
→ F → Enter the function matrix
2. Select a function group (e.g. CURRENT OUTPUT 1)
3. Select a function (e.g. TIME CONSTANT)
Change parameter / enter numerical values:
OS
→ select or enter: enable code, parameters, numerical values
F
→ save your entries
4. Exit the function matrix:
– Press and hold down Esc key (X) for longer than 3 seconds
→ HOME position
– Repeatedly press Esc key (X)
→ return step by step to HOME position
Fig. 21: Selecting functions and configuring parameters (function matrix)
>3s
-
+
E
Esc
E
E
E
E
E E E E E
–
+
➁
➃
➂
➀
+
Esc
–
+
Esc
–
+
Esc
–
E
F06-x0xxxxxx-19-xx-xx-xx-000