Endress+Hauser Proline Promass 80 - Dimensions: Promass F

PROline Promass 80 10 Technical data
Endress+Hauser 105
10.9 Dimensions: Promass F
Dimensions Promass F: flange connections EN (DIN), ANSI, JIS
Fig. 44: Dimensions Promass F: flange connections EN (DIN), ANSI, JIS
Flange EN 1092-1 (DIN 2501 / DIN 2512N
1)
) / PN 16: 1.4404/316L
Surface roughness (flange): EN 1092-1 Form B1 (DIN 2526 Form C), Ra 6.3...12.5
µm
DN A B C G L N S LK U di
100 571 324 247 220 1128 8 x Ø18 20 180 107.1 51.20
150 740 362 378 285 1330 8 x Ø22 22 240 159.3 68.90
1)
Flange with groove to EN 1092-1 Form D (DIN 2512N) available
Flange EN 1092-1 (DIN 2501 / DIN 2512N
1)
) / PN 40: 1.4404/316L, Alloy C-22
Surface roughness (flange): EN 1092-1 Form B1 (DIN 2526 Form C), Ra 6.3...12.5
µm
DN A B C G L N S LK U di
8 341 266 75 95 370 4 x Ø14 16 65 17.3 5.35
15 341 266 75 95 404 4 x Ø14 16 65 17.3 8.30
25 341 266 75 115 440 4 x Ø14 18 85 28.5 12.00
40 376 271 105 150 550 4 x Ø18 18 110 43.1 17.60
50 424 283 141 165 715 4 x Ø18 20 125 54.5 26.00
80 505 305 200 200 840 8 x Ø18 24 160 82.5 40.50
100
2)
571 324 247 235 1128 8 x Ø22 24 190 107.1 51.20
150
2)
740 362 378 300 1370 8 x Ø26 28 250 159.3 68.90
1)
Flange with groove to EN 1092-1 Form D (DIN 2512N) available
2)
Not available in Alloy C-22
Flange EN 1092-1 (DIN 2501) / PN 40 (with DN 25 flanges): 1.4404/316L
Surface roughness (flange): EN 1092-1 Form B1 (DIN 2526 Form C), Ra 6.3...12.5
µm
DN A B C G L N S LK U di
8 341 266 75 115 440 4 x Ø14 18 85 28.5 5.35
15 341 266 75 115 440 4 x Ø14 18 85 28.5 8.30
F06-80Fxxxxx-06-00-xx-xx-000