Endress+Hauser Proline Promass 80 - 10.11 Dimensions: Promass E

PROline Promass 80 10 Technical data
Endress+Hauser 129
10.11 Dimensions: Promass E
Dimensions Promass E: flange connections EN (DIN), ANSI, JIS
Abb. 64: Dimensions Promass E: flange connections EN (DIN), ANSI, JIS
Flansch EN 1092-1 (DIN 2501 / DIN 2512N
1)
) / PN 40: 1.4404/316L
DN A B C G L N S LK U di
8 317 224 93 95 232 4 x Ø14 16 65 17.3 5.35
15 331 226 105 95 279 4 x Ø14 16 65 17.3 8.30
25 337 231 106 115 329 4 x Ø14 18 85 28.5 12.00
40 358 237 121 150 445 4 x Ø18 18 110 43.1 17.60
50 423 253 170 165 556 4 x Ø18 20 125 54.5 26.00
1)
Flange with groove to EN 1092-1 Form D (DIN 2512N) available
Flange EN 1092-1 (DIN 2501) / PN 40 (with DN 25-Flanges): 1.4404/316L
DN A B C G L N S LK U di
8 341 266 75 115 440 4 x Ø14 18 85 28.5 5.35
15 341 266 75 115 440 4 x Ø14 18 85 28.5 8.30
Flansch EN 1092-1 (DIN 2501 / DIN 2512N
1)
) / PN 63: 1.4404/316L
DN A B C G L N S LK U di
50 423 253 170 180 565 4 x Ø22 26 135 54.5 26.00
1)
Flange with groove to EN 1092-1 Form D (DIN 2512N) available
F06-80Exxxxx-06-00-xx-xx-000