Endress+Hauser Proline Promass 80 - Page 145

PROline Promass 80 10 Technical data
Endress+Hauser 145
Dimensions Promass H:
purge connections / secondary containment monitoring
Fig. 79: Dimensions Promass H: purge connections / secondary containment monitoring
Flange ANSI B16.5 / Cl 300: 1.4301/304, parts in contact with medium zirconium 702
Surface roughness (flange): Ra 3.2...6.3
µm
DN A B C D G L N S LK U di
8
1)
3/8" 384 280 104 41 95.2 336 4 x Ø15.7 14.2 66.5 15.70 8.51
15 1/2" 385 280 105 41 95.2 440 4 x Ø15.7 14.2 66.5 15.70 12.00
25 1" 401 280 121 41 124.0 580 4 x Ø19.1 17.5 88.9 26.70 17.60
40 1 1/2" 475 304 171 65 155.4 794 4 x Ø22.3 20.6 114.3 40.90 25.50
50 2" 556 315 241 76 165.1 1071 8 x Ø19.1 23.6 127 52.6 40.5
1)
DN 8 with DN 15 flanges as standard
Flange JIS B2238 / 20K: 1.4301/304, parts in contact with medium zirconium 702
Surface roughness (flange): Ra 3.2...6.3
µm
DN A B C D G L N S LK U di
8
1)
384 280 104 41 95 336 4 x Ø15 14 70 15.00 8.51
15 385 280 105 41 95 440 4 x Ø15 14 70 15.00 12.00
25 401 280 121 41 125 580 4 x Ø19 16 90 25.00 17.60
40 475 304 171 65 140 794 4 x Ø19 18 105 40.00 25.50
50 556 315 241 76 165 1071 8 x Ø19 23.6 127 52.60 40.50
1)
DN 8 with DN 15 flanges as standard
DN L H A G
85582251/2" NPT
15 102 82 25 1/2" NPT
25 172 82 25 1/2" NPT
40 263 102 45 1/2" NPT
F06-8xxxxxxx-06-05-xx-xx-007