Endress+Hauser Proline Prowirl 72 - Page 79

Proline Prowirl 72 FOUNDATION Fieldbus 10 Technical data
Endress + Hauser 79
Dimensions of flow conditioner according to JIS
DN Pressure
rating
Centering diameter [mm] D1 / D2 * s
[mm]
Weight
[kg]
15
10K 60.3 D2 2.0 0.06
20K 60.3 D2 2.0 0.06
40K 66.3 D1 2.0 0.06
25
10K 76.3 D2 3.5 0.14
20K 76.3 D2 3.5 0.14
40K 81.3 D1 3.5 0.14
40
10K 91.3 D2 5.3 0.31
20K 91.3 D2 5.3 0.31
40K 102.3 D1 5.3 0.31
50
10K 106.6 D2 6.8 0.47
20K 106.6 D2 6.8 0.47
40K 116.3 D1 6.8 0.5
80
10K 136.3 D2 10.1 1.1
20K 142.3 D1 10.1 1.1
40K 151.3 D1 10.1 1.3
100
10K 161.3 D2 13.3 1.8
20K 167.3 D1 13.3 1.8
40K 175.3 D1 13.3 2.1
150
10K 221.0 D2 20.0 4.5
20K 240.0 D1 20.0 5.5
40K 252.0 D1 20.0 6.2
200
10K 271.0 D2 26.3 9.2
20K 284.0 D1 26.3 9.2
250
10K 330.0 D2 33.0 15.8
20K 355.0 D2 33.0 19.1
300
10K 380.0 D2 39.6 26.5
20K 404.0 D1 39.6 26.5
* D1 The flow conditioner is fitted at the outer diameter between the bolts.
D2 The flow conditioner is fitted at the indentations between the bolts.