Endress+Hauser Proline Prowirl 72 - Factory settings; 13.1 Metric system units (not for USA and Canada)

Proline Prowirl 72 FOUNDATION Fieldbus 13 Factory settings
Endress + Hauser 121
13 Factory settings
13. 1 Metric system units (not for USA and Canada)
Units flow (Transducer Block "Flow")
Units density, length, temperature (Transducer Block "Flow")
Language (see Page 110)
100% value line 1 and line 2 (Transducer Block "Display")
The factory settings in the table are given in the unit dm³/s. If another unit is selected, the
corresponding value is converted and displayed in the selected unit.
Flow Units factory setting
System Unit - Volume Flow m³/h
System Unit - Calc Mass Flow kg/h
System Unit - Corr. Volume Flow Nm³/h
Units factory setting
System Unit - Density kg/m³
System Unit - Length mm
System Unit - Temperature °C
Country Language Country Language
Australia English Norway Norsk
Belgium English Austria Deutsch
Denmark English Poland Polski
Germany Deutsch Portugal Portugues
England English Sweden Svenska
Finland Suomi Switzerland Deutsch
France Francais Singapore English
The Netherlands Nederlands Spain Espanol
Hong Kong English South Africa English
India English Thailand English
Italy Italiano Czechia Cesky
Luxembourg Francais Hungary English
Malaysia English Other countries English
Nominal diameter
DN
Flange Wafer
DIN
[mm]
ANSI
[inch]
Gas
[dm³/s]
Liquid
[dm³/s]
Gas
[dm³/s]
Liquid
[dm³/s]
15 ½" 7.2 1.4 8 2
25 1" 32 4 48 6
40 1½" 80 10 80 16
50 2" 160 16 160 20
80 3" 320 40 400 48
100 4" 560 64 640 80
150 6" 1280 160 1600 160
200 8" 2400 320 – –
250 10" 4000 480 – –
300 12" 5600 640 – –