13 Factory settings Proline Prowirl 72 FOUNDATION Fieldbus
122 Endress + Hauser
Unit totalizer (Transducer Block "Totalizer")
Depending on the option selected in the "Totalizer - Assign" function, the following units are set:
13. 2 US units (only for USA and Canada)
Units flow (Transducer Block "Flow")
Units density, length, temperature (Transducer Block "Flow")
Language (see Page 110)
100% value line 1 and line 2 (Transducer Block "Display")
The factory settings in the table are given in the unit dm³/s. If another unit is selected, the
corresponding value is converted and displayed in the selected unit.
Unit totalizer (Transducer Block "Totalizer")
Depending on the option selected in the "Totalizer - Assign" function, the following units are set:
Selection in the "Totalizer - Assign" function Unit
Volume Flow m³
Calc Mass Flow kg
Corr. Volume Flow Nm³
Flow Units factory setting
System Unit - Volume Flow US gal/h
System Unit - Calc Mass Flow lb/min
System Unit - Corr. Volume Flow Sm³/h
Units factory setting
System Unit - Density lb/ft³
System Unit - Length Inch
System Unit - Temperature °F
Country Language
USA English
Canada English
Nominal diameter
DN
Flange Wafer
DIN
[mm]
ANSI
[inch]
Gas
[US gal/min]
Liquid
[US gal/min]
Gas
[US gal/min]
Liquid
[US gal/min]
15 ½" 110 22 120 32
25 1" 550 63 760 95
40 1½" 1300 160 1300 250
50 2" 2500 250 2500 310
80 3" 5100 630 6300 760
100 4" 8900 1000 10 000 1300
150 6" 20 000 2500 25 000 2500
200 8" 38 000 5100 – –
250 10" 63 000 7600 – –
300 12" 89 000 10 000 – –
Selection in the "Totalizer - Assign" function Unit
Volume Flow US gal
Calc Mass Flow lb
Corr. Volume Flow Sm³
To Next Page
Loading...
