Endress+Hauser PROMAG 33 - Table of Contents

Contents
1 Safety Instructions . . . . . . . 5
1.1 Correct usage . . . . . . . . . . . 5
1.2 Dangers and notes . . . . . . . . . 5
1.3 Personnel for installation, start-up and
operation . . . . . . . . . . . . 6
1.4 Repairs and dangerous substances . . 6
1.5 Technical improvements . . . . . . . 6
2 Instrument Identification . . . . 7
3 Mounting and Installation . . . . 9
3.1 Transport instructions (DN ≥ 350/14") . . 9
3.2 Mounting location . . . . . . . . 10
3.3 Mounting position . . . . . . . . . 12
3.4 Nominal diameter and flow rate . . . . 13
3.5 Adapters . . . . . . . . . . . . 14
3.6 Mounting Promag A sensor . . . . . 15
3.7 Mounting Promag H sensor . . . . 16
3.8 Mounting Promag F sensor . . . . . 17
3.9 Turning the transmitter housing
and local display . . . . . . . . . 19
3.10 Mounting the transmitter (remote version) 20
4 Electrical Connection . . . . . 21
4.1 Degree of protection . . . . . . . . 21
4.2 Connecting the transmitter . . . . . . 22
4.3 Connecting the cable of the remote
version . . . . . . . . . . . . . 25
4.4 Cable specifications . . . . . . . . 27
4.5 Potential equalisation . . . . . . . 28
4.6 Connecting E+H Rackbus
and Rackbus RS 485 . . . . . . . . 30
4.7 Connecting HART Communicator . . . 33
4.8 Connecting Commubox FXA 191
(Commuwin II software) . . . . . . . 33
4.9 Commissioning . . . . . . . . . . 34
5 Display and Operation . . . . . 35
5.1 Display and operating elements . . 35
5.2 Operation (operating matrix) . . . . . 36
5.3 Operating example . . . . . . . . 39
5.4 Operation with the HART protocol . . . 40
5.5 Operating Rackbus RS 485 . . . . . 42
6 Description of Functions . . . . 47
7 Trouble-shooting, Maintenance
and Repairs . . . . . . . . . . 85
7.1 Response of the measuring system
on faults or alarm . . . . . . . . . 85
7.2 Trouble-shooting and remedy . . . . 87
7.3 Error, alarm and status messages . . 90
7.4 Replacing the measuring electrodes . 94
7.5 Replacing the transmitter electronics . 96
7.6 Replacing the fuse . . . . . . . . 97
7.7 Repairs . . . . . . . . . . . . 97
7.8 Spare parts . . . . . . . . . . 97
7.9 Maintenance . . . . . . . . . . . 97
8 Dimensions . . . . . . . . . . 99
8.1 Dimensions Promag 33 A . . . . 99
8.2 Dimensions Promag 33 H . . . . 102
8.3 Dimensions Promag 33 F
(DN 15...300) . . . . . . . . . 104
8.4 Dimensions Promag 33 F
(DN 350...2000) . . . . . . . . 105
9 Technical Data . . . . . . . . 107
10 Functions at a Glance . . . . . 117
11 Index . . . . . . . . . . . . 121
Promag 33
Endress+Hauser 3