Operating using the “Commuwin II” program
Commuwin II is a universal program for remote operation of field and control-room
devices. Use of the Commuwin II operating program is possible independent of the
type of instrument or Communication (HART, PROFIBUS, Rackbus RS 485, etc.)
chosen.
Commuwin II offers the following functions:
• parameterisation of functions
• visualisation of measuring values
• saving of instrument parameters
• device diagnostics
• measuring point documentation
Commuwin II may also be combined with other software packages to visualise
processes.
Note!
For additional information on Commuwin II, see the following E+H documentation:
• System Information: SI 018F/00/en “Commuwin II”
• Operating Manual: BA124F/00/en “Commuwin II Operating Program”
5.5 Operating Rackbus RS 485
When programming via a Rackbus interface, all Promag instrument functions are
arranged and displayed in an E+H operating matrix → see page 44, 45
Note!
5 Display and Operation Promag 33
42 Endress+Hauser
To Next Page
Loading...
