Endress+Hauser PROMAG 33 - Operation (operating matrix)

5.2 Operation (operating matrix)
PRPROMAG
ENDRESS+HAUSER
E
- +
E E E E E
+
-
➁
➂
➃
E
➀
>3s
E
ba009y33
HOME position
Function Groups Functions
Note!
• An automatic return to the HOME position will be made if the operating elements are
not pressed for 60 seconds (only when the programming is locked).
• If the diagnosis function
7
is activated from the HOME position, then an automatic
return to HOME position will be made if the operating elements are not pressed within
60 seconds; whether the programming is enabled or locked.
➀
Access to the operating matrix (from the HOME position)
➁
Select function group (> GROUP SELECT. <)
➂
Select function (enter parameters or numeric values with
6
and store with
1
)
Overview of all functions and parameters → see page 117
Operating example → see page 37
Function description → see page 47 ff.
➃
Leave operating matrix → to HOME position (from any matrix position) or
Select other functions
Fig. 37
Selecting functions in the
E+H operating matrix
Note!
5 Display and Operation Promag 33
36 Endress+Hauser