6 Description of Functions
This section is an in-depth description of the individual functions and specifications of
Promag 33. Factory settings are indicated in
bold italics
. On request, Promag 33
measuring instruments are also available with customised parameterisation. In such
cases, values or settings may differ from the factory settings shown here.
Function group SYSTEM UNITS → Page 47
Function group CURRENT OUTPUT → Page 49
Function group PULSE / FREQ. OUTPUT → Page 53
Function group RELAYS → Page 58
Function group BATCHING → Page 63
Function group DISPLAY → Page 66
Function group COMMUNICATION → Page 69
Function group PROCESSING PARAMETER → Page 72
Function group SYSTEM PARAMETER → Page 77
Function group SENSOR DATA → Page 81
Function group
SYSTEM UNITS
FLOW RATE
UNIT
Selection of the required units for the flow rate (volume/time).
The units selected here also define those for:
• Creepage
• Relay switching points
• Full scale values for current and frequency
6
dm
3
/s – dm
3
/min – dm
3
/h –
m
3
/s – m
3
/min –
m
3
/h
–
l/s – l/min – l/h –
hl/min – hl/h –
gal/min – gal/hr – gal/day –
gpm – gph – gpd – mgd –
bbl/min – bbl/hr – bbl/day –
cfs (cubic feet per second) –
cc/min
7
The actual flow rate appears on the display.
VOLUME UNIT
Selection of the required units for the volume flow.
The units selected here also define those for:
• Pulse value (e.g. m
3
→ m
3
/p)
• Totalizer
• Batch quantity, batch precontact quantity, compensation quantity
6
dm
3
–
m
3
– l – hl – gal – bbl – 10
3
gal – ft
3
Promag 33 6 Description of Functions
Endress+Hauser 47
To Next Page
Loading...
