Endress+Hauser PROMAG 33 - Page 48

Function group
SYSTEM UNITS
GALLONS /
BARREL
In the USA and UK, the ratio of barrels (bbl) to gallons (gal) is defined
according to the fluid used and the specific industry. Therefore the
following definitions have to be selected:
• US or imperial gallons
• Ratio gallons/barrel
Note!
This function is only available if barrel or gallon is selected as
“FLOW RATE UNIT” or “VOLUME UNIT”.
6
US: 31.0 gal/bbl → for beer
US: 31.5 gal/bbl → for liquids (used in normal cases)
US: 42.0 gal/bbl → for petrochemicals
US: 55.0 gal/bbl → for filling tanks
Imp:36.0 gal/bbl → for beer and similar liquids
Imp:42.0 gal/bbl → for petrochemicals
NOM. DIAM. UNIT
Selection of the required unit for the nominal diameter of the sensor.
The unit selected here also defines those for the display in the “NOMINAL
DIAMETER” function (see page 81).
6
mm – inch
7
Display of the actual set nominal diameter (in the units selected).
Note!
6 Description of Functions Promag 33
48 Endress+Hauser