Endress+Hauser PROMAG 33 - Display and Operation; Display and operating elements

5 Display and Operation
5.1 Display and operating elements
With the Promag 33 display, all important parameters can be read off or configured
using the E+H operating matrix.
E
-
+
ENDRESS+HAUSER
PROMAG
>3s
Enter key
3
HOME position → Access to the operating matrix
Leave operating matrix → Return to HOME position
2
(activate key for more than 3 seconds)
1
Access function
Save entered figures and settings
LC Display
• Illuminated, double-spaced with 16 characters.
• Displayed are menu texts and numerical values as well as error, alarm and
status messages
• HOME position (display during normal measuring operation):
Upper line → freely selectable measured variable (factory setting “FLOW RATE”)
Bottom line → freely selectable measured variable (factory setting “TOTAL VOLUME”)
+/ – keys
• Select Function Groups
• Enter numerical values (if keys are kept pressed,
the numbers displayed will begin changing at accelerated rate)
• Select parameters or settings
7 Diagnostic and help function (activate +/– keys simultaneously)
3 optical operating elements
“Touch-Control”
up: Infrared transmitter diode
down: Infrared receiver diode
ba014y34
Fig. 36
Display and operating elements
Promag 33 5 Display and Operation
Endress+Hauser 35