Endress+Hauser Smartec S CLD132 - Version

Smartec S CLD132 Wiring
Endress+Hauser 21
Connection compartment sticker
C07-CLD132xx-05-06-00-xx-005.eps
Fig. 21: Connection compartment sticker of Smartec S
!
Note!
The protection class of this instrument is I. The metal housing must be connected to PE.
"
Caution!
• Terminals designated as NC may not be switched.
• Undesignated terminals may not be switched.
Structure and termination of measuring cable
31 +
32 -
33 +
34 -
85 +
NC
NC
NC
86 -
93 + S
94 - 42
81 + 43
82 - 41
Lf
Temp.
(opt.)
+15V
10mA
Bin 2
Bin 1
Mains
Hilfsenergie
131082-4A
12
Sensor
15
84
13
11
16
83
YE
WH
GN
∼
–
∼
–
C07-CLK5xxxx-00-05-00-en-002.eps
Fig. 22: Structure of CLK5 measuring cable
C07-CLD132xx-05-06-00-xx-006.eps
Fig. 23: Electrical connection of the CLS52 sensor for
the separate version
(84) (83)
GN (11)
WH (12)
YE (13)
CLK5
RD
WH
Semiconductor
screen
Screen
(16)
Screen
(15)
BN
(unused)