Troubleshooting Smartec S CLD132
70 Endress+Hauser
9.6 Return
If the transmitter has to be repaired, please return it cleaned to the sales centre responsible.
Please use the original packaging, if possible.
Please enclose the completed "Declaration of contamination" (copy the second last page of these
Operating Instructions) with the packaging and the transportation documents.
No repair without completed "Declaration of contamination"!
9.7 Disposal
The device contains electronic components and must therefore be disposed of in accordance with
regulations on the disposal of electronic waste.
Please observe local regulations.
122 Cable entry kit Conduit Cable glands, plugs, Goretex filter 51502283
130 Screw and gasket kit All screws and gaskets 51501596
140 Protection cover kit Protection cover for connection
compartment
51502382
Item Kit designation Name Function/content Order number
To Next Page
Loading...
