Endress+Hauser Smartec S CLD132 - 2 Identification; Device Designation; Nameplate; Product Structure Smartec S CLD132

Smartec S CLD132 Identification
Endress+Hauser 7
2 Identification
2.1 Device designation
2.1.1 Nameplate
Compare the order code on the nameplate (on the Smartec) with the product structure (see below)
and check that it agrees with your order.
You can identify the instrument variant by the order code on the nameplate. Under "Codes", you
can find the release code for the software upgrade "MRS".
2.1.2 Product structure Smartec S CLD132
C07-CLD132xx-18-06-00-xx-001.eps
Fig. 1: Nameplate CLD132 (example)
Version
P Compact version
S Separate transmitter, cable length 20 m / 65.62 ft
W Separate transmitter, cable length 5 m / 16.41 ft
X Separate transmitter, cable length 10 m / 32.81 ft
Process connection
MV1 Dairy fitting DN 50 (acc. to DIN 11851)
CS1 Clamp connection 2" (acc. to ISO 2852)
GE1 Internal thread G 1 ½
VA1 Varivent connection DN 40 ... 125
AP1 APV connection DN 40 ... 100
SMS SMS connection 2"
Cable entry
1 Cable gland Pg 13.5
3 Cable gland M 20 x 1.5
5 Conduit adapter NPT ½ "
Power supply
0 230 V AC
1 115 V AC
5 100 V AC
824 V AC / DC
Current output / communication
AA Current output conductivity, without communication
AB Current output conductivity and temperature, without communication
HA HART, current output conductivity
HB HART, current output conductivity and temperature
PE PROFIBUS-PA, no current output
PF PROFIBUS-PA, M 12 connector, no current output
PP PROFIBUS-DP, no current output
Additional features
1 Basic version with fast temperature measurement
2 Remote parameter set switching with fast temperature measurement
6 Basic version with encapsulated Pt 100 for high loads
7 Remote parameter set switching with encapsulated Pt 100 for high loads
CLD132- complete order code
131697-4B
ENDRESS+HAUSER
SMARTEC S
order code / Best.Nr.
serial no. / Ser.-Nr.
/Codes:
:
:
:
:
:
:
:
:
prot. class / Schutzart
ambient temp. / Umgebungstemperatur
output 1 / Ausgang 1
output 2 / Ausgang 2
mains / Netz
measuring range / Messbereich
temperature / Temperatur:
CLD 132-PMV130AB2
1C466C05 G00
10 µS ...2000 mS/cm
8833
conductivity ind./ Leitfähigkeit ind.
-10...+125 °C (+140 °C max. 30 min)
0/4...20 mA
0/4...20 mA
230 VAC 50/60 Hz 7,5 VA
0...+55 °C
IP67