EasyManua.ls Logo

Endress+Hauser Smartec S CLD132 - Measurement data of CLS52 sensor

Endress+Hauser Smartec S CLD132
84 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Smartec S CLD132 Technical Data
Endress+Hauser 73
10.6 Mechanical construction
10.7 Measurement data of CLS52 sensor
10.8 Process
Design, dimensions Separate transmitter with mounting
plate:
L x W x D: 225 x 142 x 109 mm /
8.86 x 5.59 x 4.29"
Compact transmitter MV1, CS1,
GE1, SMS versions:
L x W x D: 225 x 142 x 242 mm /
8.86 x 5.59 x 9.53"
Compact transmitter VA1, AP1
versions:
L x W x D: 225 x 142 x 180 mm /
8.86 x 5.59 x 7.09"
Weight Separate version: approx. 2.5 kg / 5.5 lb.
Compact version with CLS 52
sensor:
approx. 3 kg / 6.6 lb.
Transmitter materials
Housing: stainless steel 1.4301, polished
Front window: polycarbonate
Conductivity measuring range recommended range: 100 µS/cm ... 2000 mS/cm (uncompensated)
Measured value deviation -5 ... 100 °C / 23 ... 212 °F ±10 µS/cm + 0.5 % of measured value
> 100 °C / 212 °F ±30 µS/cm + 0.5 % of measured value
Cell constant k = 5.9 cm
–1
Temperature sensor Pt 100 (class A acc. to IEC 60751)
Temperature measuring range –5 ... +140 °C / -31 ... +284 °F
Temperature response time t
90
< 5 s versions with stainless steel socket
(CLD132-********1/2)
t
90
< 3.5 min versions with encapsulated Pt 100
(CLD132-********6/7)
Materials in contact with
medium
Sensor PEEK-GF20
Varivent flange, APF flange:
–Flange:
–Seal:
stainless steel 1.4435 (AISI 316L)
EPDM
Metal temperature sensor socket:
– Socket:
–Seal:
stainless steel 1.4435 (AISI 316L)
Chemraz
®
Process temperature CLS52 sensor with separate version: max. 125 °C / 257 °F at 70 °C / 158 °F
ambient temperature
Compact version: max. 55 °C / 131 °F at 55 °C / 131 °F
ambient temperature
Sterilisation CLS52 sensor with separate version: 140 °C / 284 °F at 70 °C / 158 °F ambient
temperature, 4 bar / 58 psi, max. 30 min
Compact version: 140 °C / 284 °F at 35 °C / 95 °F ambient
temperature, 4 bar / 58 psi, max. 30 min
Process pressure max. 16 bar (90 °C) / 232 psi (194 °F)
no underpressure allowed with versions with stainless steel socket
(CLD132********1, CLD132********2)
Ingress protection CLS52
sensor
IP 67 / NEMA 6

Table of Contents