Identification Smartec S CLD134
10 Endress+Hauser
2.3 Certificates and approvals
Declaration of conformity
The product meets the legal requirements of the harmonized European standards.
The manufacturer confirms compliance with the standards by affixing the 4 symbol.
FDA
All materials in contact with medium are listet at FDA.
EHEDG
The sensor CLS54 has been certified for in-place cleanability according to EHEDG document 2.
!
Note!
The cleanability of a sensor also depends on the way of installation. To install the sensor in a pipe
system use the appropriate and EHEDG certified flow assembly for the respective process
connection.
3-A
Certified according to 3-A Standard 74-03 ("3-A Sanitary Standards for Sensor and Sensor Fittings
and Connections Used on Milk and Milk Products Equipment").
Biological reactivity (USP class VI) (optional)
Certificate on biological reactivity tests according to USP (United States Pharmacopeia) part <87>
und part <88> class VI with traceability of the materials in contact with medium.
To Next Page
Loading...
