Troubleshooting Smartec S CLD134
72 Endress+Hauser
9.5 Spare parts
Spare parts are to be ordered from your sales centre responsible. Specify the order numbers listed in
the chapter "Spare parts kits".
To be on the safe side, you should always specify the following data with your spare part orders:
• Instrument order code (order code)
• Serial number (serial no.)
• Software version where available
Refer to the nameplate for the order code and serial number.
The software version is displayed in the instrument sofware (see chapter "Instrument configuration")
if the instrument processor system is functional.
To Next Page
Loading...
