Endress+Hauser Smartec S CLD134 - Product Structure Smartec S CLD134

Identification Smartec S CLD134
8 Endress+Hauser
2.1.2 Product structure Smartec S CLD134
a)
Dairy pipe fitting DIN 11851 is generally not considered hygienic. With the adapter SKS Siersma, it meets
the 3-A standards requirements.
b)
Clamp connection is only hygienic in connection with Hyjoin PEEK/stainless steel ring from Hyjoin Ltd., UK,
and Kalrez seal from Dupont.
c)
Process connection is not considered hygienic according to the requirements of EHEDG.
Housing
E Transmitter only (without sensor)
P Compact version
W Separate transmitter, cable length 5 m / 16.41 ft
X Separate transmitter, cable length 10 m / 32.81 ft
S Separate transmitter, cable length 20 m / 65.62 ft
Process connection
000 Not selected (transmitter only)
MV5 Dairy fitting DIN 11851, DN 50
a)
AA5 Aseptic fitting DIN 11864-1 form A, pipe DIN 11850, DN 50
CS1 Clamp ISO 2852, 2" (long)
b)
SMS SMS 2"
c)
VA4 Varivent
®
N DN 40 to 125
BC5 NEUMO BioControl
®
D50
Cable entry
3 Cable gland M 20 x 1.5
5 Conduit adapter NPT ½ "
Power supply
0230 V AC
1115 V AC
5100 V AC
824 V AC / DC
Current output / communication
AA Current output conductivity, without communication
AB Current output conductivity and temperature, without communication
HA HART, current output conductivity
HB HART, current output conductivity and temperature
PE PROFIBUS-PA, no current output
PF PROFIBUS-PA, M 12 connector, no current output
PP PROFIBUS-DP, no current output
Additional features
1 Basic version
2 Remote parameter set switching
3 Biological reactivity tests according to USP <87>, <88> class VI
4 Remote parameter set switching and biological reactivity tests according to
USP <87>, <88> class VI
CLD134- complete order code