Smartec S CLD134 Accessories
Endress+Hauser 65
8.4 Post mounting kit
• Mounting kit for installation of Smartec S CLD132/CLD134 on horizontal or vertical pipes and
posts (max. Ø 60 mm (2.36")), material stainless steel 1.4301;
order no.: 50062121
a0004902
Fig. 42: Mounting kit for installing CLD132/CLD134 separate version on posts or pipes (base plate belongs to the
scope of delivery of the transmitter)
8.5 Software upgrade
• Software upgrade
Remote parameter set switching (measuring range switching, MRS) and determination of
temperature coefficient;
order no.: 51501643
Serial number of instrument must be specified with order.
8.6 Calibration solutions
Precision solutions, traceable to SRM (standard reference material) by NIST, for qualified calibration
of conductivity measurement systems according to ISO 9000, with temperature table
•CLY11-B
149.6 μS/cm (reference temperature 25 °C / 77 °F), 500 ml / 16.9 fl.oz
Order no. 50081903
•CLY11-C
1.406 mS/cm (reference temperature 25 °C / 77 °F), 500 ml / 16.9 fl.oz
Order no. 50081904
•CLY11-D
12.64 mS/cm (reference temperature 25 °C/ 77 °F), 500 ml / 16.9 fl.oz
Order no. 50081905
•CLY11-E
107.0 mS/cm (reference temperature 25 °C / 77 °F), 500 ml / 16.9 fl.oz
Order no. 50081906
8.7 Optoscope
• Optoscope
Interface between transmitter and PC / laptop for service purposes.
The Windows software "Scopeware" required for the PC or laptop is supplied with the Optoscope.
The Optoscope is supplied in a sturdy plastic case with all the accessories required.
Order no. 51500650
To Next Page
Loading...
